Product ID:XVPER 185 XFC,EUTECROD 185 FC
MSDS Date:03/15/1993
FSC:3439
NIIN:00-833-3472
MSDS Number: BXJVK

EUTECTIC CORP

40-40 172ND STREET
FLUSHING, NY 11358-2799
US

Emergency Phone: 718-358-4000

Info Phone: 718-358-4000

Cage: 72271

EUTECTIC CORP

CHARLOTTE, NC 28273 US

Telephone: 704-527-9800/ 800-221-1433

Cage: 72271

COPPER (SARA 313) (CERCLA)

CAS: 7440-50-8

RTECS: GL5325000

Fraction By Weight: 40 - 50%

OSHA PEL 0.1MG/M3 FUME/1 DUST

ACGIH TLV: 0.2 MG/M3 FUME; 9495

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

ZINC (SARA 313) (CERCLA)

CAS: 7440-66-6

RTECS: ZG8600000

Fraction By Weight: 30 - 40%

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

NICKEL (SARA 313) (CERCLA)

CAS: 7440-02-0

RTECS: QR5950000

Fraction By Weight: 10 - 15%

OSHA PEL 1 MG/M3

ACGIH TLV: 1 MG/M3; 9495

BORIC ACID

CAS: 10043-35-3

RTECS: ED4550000

OSHA PEL 10 MG BORATES/M3

ACGIH TLV: 5 MG BORATES/M3

SODIUM TETRABORATE, DECAHYDRATE/BORAX

CAS: 1303-96-4

RTECS: VZ2275000

OSHA PEL 10 MG/M3

ACGIH TLV: 5 MG/M3; 9495

LD50 LC50 Mixture:LD50 (ORAL, RAT) IS NOT RELEVANT.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:TARGET ORGANS:EYE, SKIN, LUNG, CNS.
ACUTE- NO HAZARD AS ROD. DUST CAN IRRITATE EYES & RESPIRATORY
TRACT. FUMES CAN CAUSE IRRITATION, CNS EFFECTS. HARMFUL IF
SWALLOWED. MAY CAUSE METAL FUME FEVER. ARC RAYS CAN INJURE EYES &
BURN SKIN. ELECTRIC SHOCK CAN KILL. IR RADIATION CAN INJURE EYES.
CHRONIC- MAY CAUSE LUNG DAMAGE.
Explanation of Carcinogenicity:CONTAINS NICKEL.
Effects of Overexposure:IRRITATION, SKIN DERMATITIS OR ECZEMA, COUGH,
WHEEZING AND SHORTNESS OF BREATH, DECREASED PULMONARY FUNCTION,
HEADACHE, NAUSEA, VOMITING, EPIGASTRIC PAIN, WEAKNESS, CONVULSION
Medical Cond Aggravated by Exposure:PERSONS WITH PRE-EXISTING SKIN
DISORDERS, EYE PROBLEMS OR IMPAIRED RESPIRATORY FUNCTION MAY BE
MORE SUSCEPTIBLE TO THE EFFECTS OF THIS PRODUCT.

First Aid:OBTAIN MEDICAL ATTENTION IF NEEDED. EYES:FLUSH WITH WATER FOR
15 MINUTES. KEEP EYELIDS OPEN. SKIN:WASH WITH SOAP & WATER.
INHALATION:MOVE TO FRESH AIR. PROVIDE CPR/OXYGEN IF NEEDED.
INGESTION:CALL PHY SICIAN/POISON CONTROL CENTER IMMEDIATELY.

Flash Point:NONE
Extinguishing Media:DRY CHEMICAL, CARBON DIOXIDE, SAND OR FOAM.
Fire Fighting Procedures:TREAT AS A METALLIC FIRE. WEAR PROTECTIVE
CLOTHING AND NIOSH-APPROVED SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:MAY FORM TOXIC FUMES.

Spill Release Procedures:WEAR PROTECTIVE EQUIPMENTS. VENTILATE AREA.
VACUUM LOOSE POWDER ONLY WITH VACUUMS EQUIPPED WITH HEPA
FILTERATION. WIPE AREA CLEAN. PLACE IN A BAG AND HOLD FOR WASTE
DISPOSAL. AVOID RAISING DUST.
Neutralizing Agent:NOT RELEVANT

Handling and Storage Precautions:STORE IN A DRY, WELL-VENTILATED PLACE
AWAY FROM INCOMPATIBLES. KEEP CONTAINER TIGHTLY CLOSED. KEEP OUT OF
REACH OF CHILDREN.
Other Precautions:AVOID INGESTION, INHALATION AND EXCESSIVE SKIN
CONTACT. AVOID BREATHING OF FUMES OR DUST. USE WITH ADEQUATE
VENTILATION. WASH THOROUGHLY AFTER HANDLING AND BEFORE EATING AND
DRINKING. REMOVE CONTAMINA TED CLOTHING. LAUNDER BEFORE REUSE.

Respiratory Protection:USE NIOSH APPROVED SUPPLIED AIR RESPIRATORY
PROTECTION OR RESPIRABLE FUME RESPIRATOR WHEN WELDING, BRAZING OR
SOLDERING IN CONFINED SPACE OR WHERE LOCAL EXHAUST VENTILATION DOES
NOT KEEP EXPOSURE BELO W TLV.
Ventilation:LOCAL EXHAUST VENTILATION SHOULD BE USED TO CONTROL
EXPOSURE TO AIRBORNE FUMES OR DUST WHENEVER POSSIBLE.
Protective Gloves:WELDER'S GLOVE
Eye Protection:GOGGLES
Other Protective Equipment:EYE WASH STATION, SAFETY SHOWER, APRON
(ALUMINIZED), EAR PROTECTION (TO AVOID EXCESSIVE NOISE)
Work Hygienic Practices:OBSERVE GOOD PERSONAL HYGIENE PRACTICES AND
RECOMMENDED PROCEDURES.
Supplemental Safety and Health
FORMULA CHANGED. FOR PREVIOUS FORMULATION, SEE PNI A, SAME NSN.

HCC:N1
NRC/State Lic Num:NOT RELEVANT
Viscosity:NOT RELEVANT
Evaporation Rate & Reference:NOT RELEVANT
Solubility in Water:INSOLUBLE
Appearance and Odor:SOLID

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS, STRONG BASES
Stability Condition to Avoid:WELDING ARCS
Hazardous Decomposition Products:WELDING FUMES (OXIDES OF METAL BEING
WELD) AND GASES SUCH AS OZONE, CARBON MONOXIDE, CARBON DIOXIDE,
NITROGEN OXIDES...

Waste Disposal Methods:PRIOR TO DISPOSAL, CONSIDER IF MATERIAL HAS
RECOVERY VALUE. EMPTY PRODUCT CONTAINERS, PROUCT WASTE AND CLEANING
MEDIA SHOULD BE DISPOSED OF IN ACCORDANCE WITH ALL LOCAL, STATE AND
FEDERAL REGULATIONS. PREVENT WASTE FROM CONTAMINATING ENVIRONMENT.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.